![]() In the past, a lot has been left to the interpretation of standards and as such there is always a risk of the system failing to protect workers properly and for badly maintained and faulty equipment to be in use. ![]() ![]() The same goes for ongoing inspection and maintenance. The installation and commissioning process for fall protection systems has largely been based on self-certification. Once a system has been designed and installed, it needs to be commissioned and certified. Buildings range from the modern to the ancient and, where knowledge is limited, it is important that the designer has a network of supporting specialists from whom to seek advice. The designer must have a very good understanding of the requirements for working at height and the tasks that are required to be carried out when using the anchor system, they must also have a good knowledge of building fabric and engineering principles. What processes are necessary when designing and installing a fall protection anchor system? A fall protection system incorporates several key elements, principally the anchorage whose design and application is influenced by a number of variables which depend on the risk and the situation and, as always, should only be necessary once all other methods of safe working from ground level have been considered. High-level access solutions and anchor systems are designed to facilitate the safe and efficient working environment for roof maintenance and other tasks that are performed at high level or where there is exposure to a fall. What are the key elements of a fall protection system? SHP hears from Ben Haughton, Technical Director at Arco Professional Safety Services, about the latest standards and what building owners and managers need to be aware of… Fall protection solutions play a key role. Under the Working at Height regulations, it is the duty of those in control to do all that is possible to ensure the safety of those working at height. The latest figures show 29 workers were killed as a result of falling from height in 2021/22. Falls from height continue to be the largest cause of workplace fatalities in the UK.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |